Ifihan ti Tricone die-die
TCI Tricone die-die liluho fun alabọde to lile apata Ibiyi.
Ibiyi alabọde TCI tricone bits ṣe awọn ifibọ chisel tungsten carbide ibinu lori awọn ori ila igigirisẹ ati awọn ori ila inu.Apẹrẹ yii n pese oṣuwọn liluho ni iyara ati fikun agbara eto gige gige ni alabọde si awọn iṣelọpọ lile alabọde.O-oruka rọba HSN n pese lilẹ to peye fun agbara gbigbe.
Ibiyi lile TCI tricone die-die le ṣee lo lati lu lile ati abrasive Ibiyi.Wọ awọn ifibọ tungsten carbide resistance ni a lo ninu awọn ori ila ita lati yago fun isonu ti iwọn bit.Awọn nọmba ti o pọju ti awọn ifibọ apẹrẹ hemispherical ni a lo ni gbogbo awọn ori ila lati pese agbara gige ati igbesi aye gigun.
Eyin Tricone Rock Drill Bits:
Awọn milled ehin (irin ehin) tricone die-die liluho fun asọ si alabọde apata Ibiyi.
Awọn asọ ti Ibiyi milled ehin tricone die-die ti wa ni lo lati lu kekere compressive agbara, rirọ Ibiyi.Awọn gigun ehin asọtẹlẹ gigun ni a lo lori awọn cones aiṣedeede giga lati pese awọn iwọn ilaluja ti o tobi julọ ṣee ṣe.Wọ resistance lile ti nkọju si ti wa ni lo lati sakoso ehin yiya.Lori awọn asọ ti bit orisi yi lile ti nkọju si patapata ni wiwa awọn bit eyin.
Awọn alabọde Ibiyi milled ehin tricone die-die ti wa ni lo lati lu ga compressive agbara, alabọde apata Ibiyi.Awọn ehin asọtẹlẹ titu pẹlu gigun gigun ti o dinku ni a lo ninu jara ti awọn apẹrẹ bit yii.Ti nkọju si lile ti o tọ ni a lo lati dinku yiya ehin.
Awọn abuda
Alabọde rirọ pẹlu agbara ifasilẹ kekere ati awọn okun abrasive lile, gẹgẹbi shale lile, gypsolyte lile, okuta oniyebiye rirọ, yanrin ati dolomite pẹlu awọn okun, ati bẹbẹ lọ.
Iwapọ ofofo aiṣedeede ti o wa ni ila ti inu, awọn iwapọ wedge ni ọna ita, iṣeto awọn iwapọ alafo, ati ila ti awọn trimmers ti wa ni afikun laarin awọn ọna gage ati igigirisẹ igigirisẹ
Itọsọna ti Tricone Bit Yiyan
| IDC | WOB(KN/mm) | RPM(r/min) | WULO FORMATIONS |
| 114/116/117 | 0.3 ~ 0.75 | 180-60 | Awọn idasile rirọ pupọ pẹlu agbara titẹ kekere ati adaṣe giga, gẹgẹbi amọ, mudstone, chalk, ati bẹbẹ lọ. |
| 124/126/127 | 0.3 ~ 0.85 | 180-60 | Awọn idasile rirọ pẹlu agbara titẹ kekere ati adaṣe giga, gẹgẹ bi okuta mudstone, gypsum, iyọ, simenti rirọ, ati bẹbẹ lọ. |
| 134/135/136/137 | 0.3 ~ 0.95 | 150-60 | Rirọ si alabọde formations pẹlu kekere compressive agbara ati ki o ga drillability, gẹgẹ bi awọn alabọde asọ ti shale, lile gypsum, alabọde asọ simenti, alabọde asọ ti sandstone, rirọ Ibiyi pẹlu lile interbed, ati be be lo. |
| 214/215/216/217 | 0.35 ~ 0.95 | 150-60 | Awọn idasile alabọde pẹlu agbara fisinuirindigbindigbin giga, gẹgẹbi shale rirọ alabọde, gypsum lile, okuta alabọde rirọ, okuta iyanrin alabọde, iṣelọpọ rirọ pẹlu interbed lile, ati bẹbẹ lọ. |
| 227 | 0.35 ~ 0.95 | 150-50 | Awọn agbekalẹ lile alabọde pẹlu agbara titẹ agbara giga, gẹgẹbi abrasive shale, limestone, sandstone, dolomite, gypsum lile, okuta didan, ati bẹbẹ lọ |
| Akiyesi: Awọn opin oke ti WOB ati RPM ni tabili oke ko yẹ ki o lo ni igbakanna. | |||
Itọsọna ti tricone Bits YiyanTricone Bits Eyin Iru
Iwon die-die
| Iwọn Bit | API REG PIN | Torque | Iwọn | |
| Inṣi | mm | Inṣi | KN.M | Kgs |
| 3 3/8 | 85.7 | 2 3/8 | 4.1-4.7 | 4.0-6.0 |
| 3 1/2 | 88.9 | 4.2-6.2 | ||
| 3 7/8 | 98.4 | 4.8-6.8 | ||
| 4 1/4 | 108 | 5.0-7.5 | ||
| 4 1/2 | 114.3 | 5.4-8.0 | ||
| 4 5/8 | 117.5 | 2 7/8 | 6.1-7.5 | 7.5-8.0 |
| 4 3/4 | 120.7 | 7.5-8.0 | ||
| 5 1/8 | 130.2 | 3 1/2 | 9.5-12.2 | 10.3-11.5 |
| 5 1/4 | 133.4 | 10.7-12.0 | ||
| 5 5/8 | 142.9 | 12.6-13.5 | ||
| 5 7/8 | 149.2 | 13.2-13.5 | ||
| 6 | 152.4 | 13.6-14.5 | ||
| 6 1/8 | 155.6 | 14.0-15.0 | ||
| 6 1/4 | 158.8 | 14.4-18.0 | ||
| 6 1/2 | 165.1 | 14.5-20.0 | ||
| 6 3/4 | 171.5 | 20.0-22.0 | ||
| 7 1/2 | 190.5 | 4 1/2 | 16.3-21.7 | 28.0-32.0 |
| 7 5/8 | 193.7 | 32.3-34.0 | ||
| 7 7/8 | 200 | 33.2-35.0 | ||
| 8 3/8 | 212.7 | 38.5-41.5 | ||
| 8 1/2 | 215.9 | 39.0-42.0 | ||
| 8 5/8 | 219.1 | 40.5-42.5 | ||
| 8 3/4 | 222.3 | 40.8-43.0 | ||
| 9 1/2 | 241.3 | 6 5/8 | 38-43.4 | 61.5-64.0 |
| 9 5/8 | 244.5 | 61.8-65.0 | ||
| 9 7/8 | 250.8 | 62.0-67.0 | ||
| 10 | 254 | 68.0-75.0 | ||
| 10 1/2 | 266.7 | 72.0-80.0 | ||
| 10 5/8 | 269.9 | 72.0-80.0 | ||
| 11 1/2 | 292.1 | 79.0-90.0 | ||
| 11 5/8 | 295.3 | 79.0-90.0 | ||
| 12 1/4 | 311.2 | 95.0-102. | ||
| 12 3/8 | 314.3 | 95.0-102.2 | ||
| 12 1/2 | 317.5 | 96.0-103.0 | ||
| 13 1/2 | 342.9 | 105.0-134.0 | ||
| 13 5/8 | 346.1 | 108.0-137.0 | ||
| 14 3/4 | 374.7 | 7 5/8 | 46.1-54.2 | 140.0-160.0 |
| 15 | 381 | 145.0-165.0 | ||
| 15 1/2 | 393.7 | 160.0-180.0 | ||
| 16 | 406.4 | 200.0-220.0 | ||
| 17 1/2 | 444.5 | 260.0-280.0 | ||
| 26 | 660.4 | 725.0-780.0 | ||
Ilana iṣelọpọ
Ifaara
5 1/2 Inch Water Well Roller Cone Bit 114mm Irin ehin Tricone Bit
The tricone drill bit is the most popular liluho bit in the world, it can be popular used for Epo&Gas Drilling, Mining, Water Well, Geological Exploration area.Our tricone bit splits into metal sealed lu bit and roba sealed bit.
1. C-Center ofurufu le yago fun awọn Ibiyi ti a rogodo ni bit, imukuro awọn ito agbegbe ni isalẹ ti kanga, mu yara awọn sisan ti oke ti liluho eso ati ki o mu ROP.
2. Awọn ohun elo NBR ti o ga julọ le dinku titẹ titẹ ati mu iṣeduro iṣeduro.
3. Idaabobo G-Gauge ṣe ilọsiwaju agbara wiwọn ati ki o ṣe igbesi aye iṣẹ ti bit naa.
4. Fifi kana ti eyin laarin awọn ru taper ati awọn outflow lati gee awọn borehole ati ki o dabobo awọn konu.
| Opoiye ibere ti o kere julọ | N/A |
| Iye owo | |
| Awọn alaye apoti | Standard Export Ifijiṣẹ Package |
| Akoko Ifijiṣẹ | 7 ọjọ |
| Awọn ofin sisan | T/T |
| Agbara Ipese | Da lori Apejọ Alaye |
