Tricone Bit Ifihan
Tricone bit jẹ ọkan ninu awọn irinṣẹ akọkọ fun iho bugbamu ati liluho daradara omi.Igba aye rẹ ati iṣẹ boya o dara fun liluho tabi rara, ti o ni ipa nla nipa didara, iyara ati idiyele ti iṣẹ liluho.
Awọn fifọ apata nipasẹ bit tricone ti o lo ninu mi n ṣiṣẹ pẹlu ipa mejeeji ti awọn eyin ati irẹrun ti o fa nipasẹ yiyọ ti awọn eyin, eyi ti o mu iṣẹ ṣiṣe ti o ga julọ ati iye owo iṣẹ kekere.
Awọn ege tricone ti o dagbasoke ati ti iṣelọpọ nipasẹ JCDRILL ni a lo ni akọkọ fun iwakusa-ìmọ-ọfin nla, gẹgẹbi awọn maini ọfin-ìmọ, awọn maini irin, awọn maini bàbà ati awọn maini molybdenum, tun awọn maini ti kii ṣe irin, liluho daradara omi.Pẹlu pọsi ni ọpọlọpọ iru, o tun jẹ lilo pupọ ni quarrying, imukuro ipilẹ, liluho hydrogeological, coring, tunneling ni ẹka gbigbe ọkọ oju-irin ati liluho ọpa ni awọn maini ipamo.
Itọsọna ti Tricone Bit Yiyan
| IDC | WOB(KN/mm) | RPM(r/min) | WULO FORMATIONS |
| 114/116/117 | 0.3 ~ 0.75 | 180-60 | Awọn idasile rirọ pupọ pẹlu agbara titẹ kekere ati adaṣe giga, gẹgẹbi amọ, mudstone, chalk, ati bẹbẹ lọ. |
| 124/126/127 | 0.3 ~ 0.85 | 180-60 | Awọn idasile rirọ pẹlu agbara titẹ kekere ati adaṣe giga, gẹgẹ bi okuta mudstone, gypsum, iyọ, simenti rirọ, ati bẹbẹ lọ. |
| 134/135/136/137 | 0.3 ~ 0.95 | 150-60 | Rirọ si alabọde formations pẹlu kekere compressive agbara ati ki o ga drillability, gẹgẹ bi awọn alabọde asọ ti shale, lile gypsum, alabọde asọ simenti, alabọde asọ ti sandstone, rirọ Ibiyi pẹlu lile interbed, ati be be lo. |
| 214/215/216/217 | 0.35 ~ 0.95 | 150-60 | Awọn idasile alabọde pẹlu agbara fisinuirindigbindigbin giga, gẹgẹbi shale rirọ alabọde, gypsum lile, okuta alabọde rirọ, okuta iyanrin alabọde, iṣelọpọ rirọ pẹlu interbed lile, ati bẹbẹ lọ. |
| 227 | 0.35 ~ 0.95 | 150-50 | Awọn agbekalẹ lile alabọde pẹlu agbara titẹ agbara giga, gẹgẹbi abrasive shale, limestone, sandstone, dolomite, gypsum lile, okuta didan, ati bẹbẹ lọ |
| Akiyesi: Awọn opin oke ti WOB ati RPM ni tabili oke ko yẹ ki o lo ni igbakanna. | |||
Itọsọna ti tricone Bits YiyanTricone Bits Eyin Iru
Iwon die-die
| Iwọn Bit | API REG PIN | Torque | Iwọn | |
| Inṣi | mm | Inṣi | KN.M | Kgs |
| 3 3/8 | 85.7 | 2 3/8 | 4.1-4.7 | 4.0-6.0 |
| 3 1/2 | 88.9 | 4.2-6.2 | ||
| 3 7/8 | 98.4 | 4.8-6.8 | ||
| 4 1/4 | 108 | 5.0-7.5 | ||
| 4 1/2 | 114.3 | 5.4-8.0 | ||
| 4 5/8 | 117.5 | 2 7/8 | 6.1-7.5 | 7.5-8.0 |
| 4 3/4 | 120.7 | 7.5-8.0 | ||
| 5 1/8 | 130.2 | 3 1/2 | 9.5-12.2 | 10.3-11.5 |
| 5 1/4 | 133.4 | 10.7-12.0 | ||
| 5 5/8 | 142.9 | 12.6-13.5 | ||
| 5 7/8 | 149.2 | 13.2-13.5 | ||
| 6 | 152.4 | 13.6-14.5 | ||
| 6 1/8 | 155.6 | 14.0-15.0 | ||
| 6 1/4 | 158.8 | 14.4-18.0 | ||
| 6 1/2 | 165.1 | 14.5-20.0 | ||
| 6 3/4 | 171.5 | 20.0-22.0 | ||
| 7 1/2 | 190.5 | 4 1/2 | 16.3-21.7 | 28.0-32.0 |
| 7 5/8 | 193.7 | 32.3-34.0 | ||
| 7 7/8 | 200 | 33.2-35.0 | ||
| 8 3/8 | 212.7 | 38.5-41.5 | ||
| 8 1/2 | 215.9 | 39.0-42.0 | ||
| 8 5/8 | 219.1 | 40.5-42.5 | ||
| 8 3/4 | 222.3 | 40.8-43.0 | ||
| 9 1/2 | 241.3 | 6 5/8 | 38-43.4 | 61.5-64.0 |
| 9 5/8 | 244.5 | 61.8-65.0 | ||
| 9 7/8 | 250.8 | 62.0-67.0 | ||
| 10 | 254 | 68.0-75.0 | ||
| 10 1/2 | 266.7 | 72.0-80.0 | ||
| 10 5/8 | 269.9 | 72.0-80.0 | ||
| 11 1/2 | 292.1 | 79.0-90.0 | ||
| 11 5/8 | 295.3 | 79.0-90.0 | ||
| 12 1/4 | 311.2 | 95.0-102. | ||
| 12 3/8 | 314.3 | 95.0-102.2 | ||
| 12 1/2 | 317.5 | 96.0-103.0 | ||
| 13 1/2 | 342.9 | 105.0-134.0 | ||
| 13 5/8 | 346.1 | 108.0-137.0 | ||
| 14 3/4 | 374.7 | 7 5/8 | 46.1-54.2 | 140.0-160.0 |
| 15 | 381 | 145.0-165.0 | ||
| 15 1/2 | 393.7 | 160.0-180.0 | ||
| 16 | 406.4 | 200.0-220.0 | ||
| 17 1/2 | 444.5 | 260.0-280.0 | ||
| 26 | 660.4 | 725.0-780.0 | ||
Ilana iṣelọpọ
| Opoiye ibere ti o kere julọ | N/A |
| Iye owo | |
| Awọn alaye apoti | Standard Export Ifijiṣẹ Package |
| Akoko Ifijiṣẹ | 7 ọjọ |
| Awọn ofin sisan | T/T |
| Agbara Ipese | Da lori Apejọ Alaye |
